Low-voltage XLPE insulated power cable is manufactured according to GB 12706-91 or IEC60502.

Standards:Low-voltage XLPE insulated power cableis manufactured according to GB 12706-91 or IEC60502.it is suitable to be installed in the power line with rated voltage of 0.6-1KV ofr tansmitting electricity.

Operation Characteristic:

Maximum rated temperature: The max operating temperature of cores shall not exceed 90°C.When the cable is used for long petiod, the temperature of core shall bot exceed 250°C at short ciruit for seconds.

The requirement of installment:The installation of cables is not limited by the difference of level along the route.The ambient temperature should not be below      0°C during installation.the minimum bending radius shall not be less than 10 times of the cable overall diameter when laying.

Main technical properties:

Rated voltage of cable: 0.6-1KV

D.C.resistance of conductor at 20°C: According to GB/T 3956-1997 or IEC 228:1978

Power frequency withstand voltage test for 5 minutes: No breakdown at 3.5KV.

Hot set test for insulation, 200°C  15 min with pressure 20N/CM max elongation at load, not greater than :175

Max permanet elongation after cooled:15

Power frequency withstand voltage test for 4 hours, no breakdown